VISIT USMasjid Bunder, Mumbai
EMAIL USsales@pragatienterprises.net
CALL US+91 98205 61600
Pump, spindle or steering gear taking load along the shaft? Tell us the bore and the direction of thrust and we will quote from stock. We hold the 51100, 51200, 51300 and 51400 single direction series and the 52200 and 52300 double direction series, 10 mm to 260 mm, with flat or self-aligning spherical seat washers. A thrust ball bearing is built the other way round to a radial bearing — two grooved washers with a ball and cage between them, carrying axial load rather than radial.
A thrust ball bearing consists of two grooved washers — a shaft washer and a housing washer — with a ball-and-cage assembly running between them. This design sets it apart from a standard radial bearing: a radial bearing carries load perpendicular to the shaft, while a thrust bearing is built specifically to carry axial (thrust) load along the shaft axis, and is not meant to support radial load.
A Single Direction Thrust Ball Bearing supports thrust in one direction only and is the most widely used configuration. A Double Direction Thrust Ball Bearing uses a shared central shaft washer between two housing washers, allowing it to support thrust load from both directions on the same shaft — commonly used where the shaft experiences reversing loads.
| If your application involves… | Recommended series |
|---|---|
| Light load, small pump or valve | 51100 series |
| General industrial use, most common choice | 51200 series |
| Heavy load, press or jack | 51300 / 51400 series |
| Reversing / bidirectional thrust | 52200 / 52300 series |
| Shaft-housing misalignment risk | Aligning seat (spherical washer) |
| Wet, food-grade or marine environment | Stainless Steel Thrust Bearing |
Not sure which one fits your application? Share your part number or equipment details and our team will confirm the right series within hours.
Light-duty single direction thrust ball bearing with a flat seat, suited for light axial loads at moderate speeds — small pumps, valves, and instrumentation.
Medium-duty single direction thrust ball bearing with larger balls and wider washers than the 51100 series, offering higher axial load capacity. This is the most widely used thrust ball series in general industry.
Heavy-duty single direction thrust ball bearing built for high axial loads at low to moderate speeds — used in presses, jacks, and heavy industrial machinery.
Double Direction Thrust Ball Bearing with a central shaft washer shared between two housing washers, supporting axial loads from both directions on the same shaft — ideal where thrust reverses in operation.
A variant with a spherical housing washer seat that self-aligns to compensate for shaft misalignment or housing squareness error, preventing uneven ball loading and premature failure.
Standard cylindrical bore thrust ball bearings for straight shaft mounting, plus tapered-bore variants for interference-fit mounting without a separate sleeve.
Actual product photographs from our stocked brands and inventory.
Designed specifically to carry pure thrust (axial) loads with grooved washers.
Ground raceways for accurate axial location of shafts and spindles.
Full range of single and double direction thrust ball bearings stocked (51100/51200/52200 series).
Precision balls and cages give smooth, quiet axial running.
Chrome-steel and Stainless Steel Thrust Bearing options available for pumps and wet-duty applications.
Correct lubrication and load handling extend service life.
Robust shaft and housing washers withstand repeated thrust cycles.
Rolling contact reduces heat and drag under axial load.
51100 and 51200 series thrust ball bearings support the full weight of the rotating shaft and impeller assembly in vertical pump and motor installations.
Thrust ball bearings absorb axial cutting forces in lathe, milling, and grinding spindles, often paired with a radial bearing for combined support in precision machine design.
Thrust ball bearings in steering columns and kingpins support axial load while allowing smooth rotational movement.
Heavy 51300/51400 series bearings support high axial thrust from screw jacks, valve stems, and mechanical presses under static or slow-rotating load.
We supply genuine thrust bearings from the world's leading manufacturers — with full traceability and warranty.
We stock both single direction (51100/51200/51300) and double direction (52200/52300) series, plus flat and aligning seat variants, covering the full range of axial load applications.
Share any manufacturer's part number and we'll identify the SKF, FAG, or NTN equivalent with pricing and availability within hours.
Common 51100 and 51200 series sizes dispatched within 24 hours from Mumbai. Larger or less common sizes, including stainless steel variants, sourced within 5–15 working days through our manufacturer supply chain.
Supplying maintenance teams, procurement heads, and OEMs across India since 1997, with full GST-compliant invoicing on every order.
Free technical support on housing washer selection, seat type and axial load rating so you order the right bearing for thrust-loaded shafts, jacks and swivel assemblies.
Dispatch within 24 hours from Mumbai backed by nationwide delivery to Maharashtra, Gujarat, Karnataka, Tamil Nadu, Delhi NCR and every other state.
Trusted by maintenance engineers, procurement teams, and OEM manufacturers across India since 1997.
Our vertical pump shafts run on 51100 series thrust ball bearings we source from Pragati. Their team confirmed the correct series and dispatched within a day — no downtime on our production line.
We needed a double direction thrust ball bearing for a reversing-load application and weren't sure of the right series. Pragati's team recommended the 52200 series and cross-referenced our old part number in under an hour.
We source stainless steel thrust bearings for our marine pump assemblies, and corrosion resistance is non-negotiable for us. Pragati has never sent us a wrong grade, and their technical team actually understands marine-duty requirements — not just generic bearing specs.
Sourced through ISO 9001 certified manufacturing channels.
Every consignment checked for markings, packing & authenticity.
100% original — original packaging and manufacturer traceability.
Full brand warranty against manufacturing defects.
Genuine stock of SKF, FAG, NTN, NSK, KOYO, TIMKEN & NACHI.
Genuine stock, competitive pricing and fast dispatch across India from a trusted Thrust Bearings supplier in India — tell us your requirement and get a quote in hours.
Tell us what you need — we'll respond within 12 hours.
21, J.K. Chamber, 77/83, Nagdevi Street,
Masjid Bunder (W), Mumbai - 400003
+91 98205 61600
Mon – Sat • 11:00 AM – 7:00 PM
sales@pragatienterprises.net
info@pragatienterprises.net
27AYBPS7246R1ZI
Proprietor: Mr. Jay Shah • Est. 1997
