VISIT USMasjid Bunder, Mumbai
EMAIL USsales@pragatienterprises.net
CALL US+91 98205 61600
7200 and 7300 series in standard and P4/P5 precision grades, supplied singly or in matched pairs for machine tool spindles.
An angular contact ball bearing has raceways offset relative to each other so the line of contact between ball and ring runs at an angle — typically 15°, 25°, 30° or 40° — to the bearing axis. That angle is what gives the bearing its high axial load capacity in one direction.
Because thrust is only carried one way, these bearings are normally mounted in pairs: back-to-back (DB) for rigidity against tilting moments, face-to-face (DF) where alignment error must be absorbed, or tandem (DT) where axial load in a single direction needs sharing across two bearings.
A larger contact angle raises axial capacity but lowers permissible speed. A 15° bearing suits a high-speed grinding spindle; a 40° bearing suits a screw-down or heavily thrust-loaded pump. We stock the 7200 and 7300 series and can supply matched sets to the required preload class.
The variants, series and grades we hold and source for Indian industry.
Single-row light section angular contact bearings for moderate combined loads. The standard choice for pump shafts, small gearboxes and light spindle duty.
Pumps · Small GearboxesHeavier section with higher axial and radial capacity for the same bore, used where thrust loading is substantial or shock is present.
Heavy Pumps · GearboxesContact lines diverge outward, giving a wide effective support base and high resistance to tilting moments. The usual arrangement for machine tool spindles.
Machine Tool SpindlesContact lines converge, giving a narrower support base that tolerates more shaft-to-housing misalignment than a DB set.
Misaligned ShaftsBoth bearings take thrust in the same direction, roughly doubling one-way axial capacity. A third bearing is needed to locate the shaft the other way.
Heavy One-Way ThrustTighter running accuracy and controlled preload for spindle applications where runout must be held within a few microns. Supplied as matched sets.
CNC Spindles · GrindersActual product photographs from our stocked brands and inventory.
Smooth deep-groove geometry minimises rolling resistance for high efficiency.
Low-friction design supports very high rotational speeds in motors and spindles.
C3 clearance and precision grades deliver quiet, vibration-free running.
ABEC/P5 & P6 grades available for spindles and instrument applications.
2RS, ZZ, 2Z and open variants to suit contamination and speed needs.
Chrome-steel and stainless (SS440/316) options for wet environments.
Genuine steel and lubrication for extended L10 bearing life.
Handles combined radial and moderate axial loads across all sizes.
Same-day dispatch from our Mumbai warehouse means a failed bearing doesn't stall your production line for days.
Genuine bearings with correct load rating and lubrication last significantly longer than uncertified alternatives, reducing repeat replacement cost.
Every bearing is sourced through authorized manufacturer channels, protecting your machinery from premature failure caused by fake or sub-standard bearings.
Free technical guidance on bearing type, clearance and seal configuration means you order the correct part the first time, avoiding costly reordering delays.
Standing order and bulk supply arrangements ensure your production planning is never disrupted by stock-outs.
PAN India delivery combined with same-day Mumbai dispatch gives you both national sourcing convenience and local urgency support.
These sizes ship same-day from our Mumbai warehouse. Call or WhatsApp for immediate availability.
| Part No. | Bore | OD | Width | Type | Common Application |
|---|---|---|---|---|---|
| 7200 B | 10mm | 30mm | 9mm | 40° Single | Pump shafts |
| 7202 B | 15mm | 35mm | 11mm | 40° Single | Small gearboxes |
| 7204 B | 20mm | 47mm | 14mm | 40° Single | Pumps, compressors |
| 7205 C | 25mm | 52mm | 15mm | 15° Single | High-speed spindles |
| 7206 AC | 30mm | 62mm | 16mm | 25° Single | Machine tools |
| 7207 B | 35mm | 72mm | 17mm | 40° Single | Heavy pumps |
| 7208 C/DB | 40mm | 80mm | 18mm | 15° Matched | CNC spindles |
| 7305 B | 25mm | 62mm | 17mm | 40° Single | Gearbox thrust |
| 7306 AC | 30mm | 72mm | 19mm | 25° Single | Vertical pumps |
| 7308 B/DB | 40mm | 90mm | 23mm | 40° Matched | Screw-down drives |
| Specification | Details |
|---|---|
| Series Stocked | 7200 and 7300, single row and matched pairs |
| Contact Angles | 15° (C), 25° (AC), 30°, 40° (B) |
| Bore Range | 10 mm to 200 mm |
| Material | Chrome steel (SUJ2 / GCr15); ceramic hybrid on request |
| Cage | Pressed steel, machined brass or polyamide depending on speed class |
| Arrangements | DB back-to-back, DF face-to-face, DT tandem, universal matchable |
| Precision Grade | P0 standard; P6, P5 and P4 for spindle duty |
| Preload Classes | Light, medium and heavy — specified when ordering matched sets |
| Operating Temperature | -30 °C to +120 °C standard |
6200 and 6300 series — the global standard for AC and DC motor shaft support.
Angular contact and DGBB for combined load handling at high rotational speeds.
P5/P4 angular contact bearings for precision spindle applications requiring tight tolerances.
High-speed DGBB for ring frames, spinning rotors, and draw frame rollers.
We supply genuine ball bearings from the world's leading manufacturers — with full traceability and warranty.
All bearings sourced through official manufacturer channels with full traceability. Original packaging, authentic markings, and manufacturer warranty on every product — a key reason plants across India rely on us as their ball bearing supplier.
Over 2,000 SKUs stocked at our Mumbai warehouse. Standard 6200/6300 series ball bearings dispatched within 24 hours, with urgent same-day delivery available across Maharashtra for plant breakdowns.
27+ years of bearing application knowledge. We help you select the right bearing type, series, seal configuration and precision grade — free technical consultation with every inquiry.
While our warehouse and same-day dispatch operate from Mumbai, we deliver ball bearings across Maharashtra, Gujarat, Karnataka, Tamil Nadu, Delhi NCR, Telangana and every other state, with full GST documentation on every order.
Volume discounts and standing order arrangements for OEMs and repeat buyers, with flexible invoicing to match your procurement cycle.
Hassle-free replacement on any manufacturing defect, with a straightforward returns process so a wrong SKU order never holds up your line.
Trusted by maintenance engineers, procurement teams, and OEM manufacturers across India for over 27 years.
We've been sourcing our deep groove ball bearings from Pragati Enterprises for over 4 years now. Same-day dispatch from their Mumbai warehouse has saved us during more than one production breakdown. Genuine SKF stock, every single time.
What stands out is their technical support. Our team wasn't sure which angular contact bearing grade to use for a new CNC spindle, and their engineer helped us finalize the right P5 grade within a day. Order arrived on schedule.
As a supplier to the textile industry, we need consistent bearing quality with zero downtime risk. Pragati's stainless steel bearing range and PAN India delivery have made them our go-to supplier for the last two years.
Sourced through ISO 9001 certified manufacturing channels.
Every consignment checked for markings, packing & authenticity.
100% original — original packaging and manufacturer traceability.
Full brand warranty against manufacturing defects.
Authorized supply of SKF, FAG, NTN, NSK, KOYO, TIMKEN & NACHI.
Looking for a reliable angular contact ball bearing supplier in India? Get a same-day quote on 7200 and 7300 series, matched DB, DF and DT pairs and P5/P4 precision grades — with fast dispatch from our Mumbai warehouse and PAN India delivery.
Whether you need a single bearing for a breakdown or a standing order for your entire plant — our team responds within 2 business hours, every working day.
Real technical people — no auto-replies.
Itemised quote with part number, price and availability.
Tell us your application — we'll recommend the right bearing.
Full GST invoices with HSN codes — always.
