VISIT USMasjid Bunder, Mumbai
EMAIL USsales@pragatienterprises.net
CALL US+91 98205 61600
Needle Roller · Drawn Cup · Cam Followers · Linear

INA Bearing Supplier and Importer in India
Schaeffler Group, Needle Roller Specialists

INA is the Schaeffler Group's needle roller and linear motion brand, and it is the name that comes up whenever radial space runs out. Drawn cup needle bearings, cam followers and track rollers are its core, and they turn up in gearboxes, universal joints, printing machinery and packaging lines. We import genuine INA and stock it in Mumbai.

Range

INA Bearings We Stock

Held at our Masjid Bunder warehouse and dispatched across India. Anything not listed can usually be brought in.

ProductRange
Needle roller bearingsNK, NKI, RNA and NA series
Drawn cup needle bearingsHK and BK series, open and closed end
Cam followers and track rollersKR, NUKR and similar stud types
Deep groove ball bearings6200 and 6300 series
Cylindrical roller bearingsNU and NJ designs
Pillow block unitsMounted units and housings

RNA and drawn cup types run directly on the shaft with no inner ring, which means the shaft itself becomes the raceway. It needs hardening to 58 to 64 HRC with a ground finish, or the bearing will fail early no matter whose name is on it.

Buying INA

How to Order INA Bearings From Us

Send the designation

The full number including any suffix. If the marking has worn off, a photograph of the old bearing and the shaft diameter is usually enough for us to identify it.

We confirm stock and price

If the exact INA number is on the shelf we will say so. If it is not, we will tell you the lead time rather than quote a date we cannot meet.

Cross-reference if needed

Send a competing brand's number and we will identify the INA equivalent, or tell you honestly when there isn't a direct one.

Collect or dispatch

Walk in at Nagdevi Street during business hours, or we dispatch pan-India within 24 hours with GST invoicing and HSN codes.

Genuine Stock

How You Know It's Real INA

Every INA bearing we supply is imported through official channels and reaches you in sealed original packaging, with the manufacturer's markings and batch codes intact. Check the code against INA's own verification service before you fit it — we would rather you did. Buy from us and the paperwork matches the box: GST invoice with HSN code, batch reference on request, and the same unit we quoted.

Sealed original packaging

Cartons arrive unopened with markings and batch codes readable.

Verifiable batch codes

Check them against the manufacturer's own authenticity checker.

Full GST documentation

HSN-coded invoice matching the goods, ready for audit.

Walk in and inspect

See the stock before you buy at Nagdevi Street, Masjid Bunder.

FAQ

Frequently Asked Questions

What is the difference between INA and FAG?
Both belong to Schaeffler Group. INA covers needle roller bearings, drawn cup types, cam followers and linear motion. FAG covers ball and roller bearings. If your part number starts HK, NK, RNA, NA or KR it is almost certainly INA territory.
Does an INA RNA bearing need a hardened shaft?
Yes, and this is the single most common cause of early failure with these. An RNA has no inner ring, so the shaft itself becomes the raceway. It needs hardening to 58-64 HRC with a ground finish of roughly Ra 0.2-0.4 micrometres. On a soft or turned shaft the bearing will not last.
What is a drawn cup needle bearing?
An HK or BK type, where the outer ring is a thin drawn steel cup rather than a machined ring. It gives you the smallest possible radial section, which is why they appear in gearboxes, universal joints and linkages where there is no room for a conventional bearing.
Do you stock INA cam followers and track rollers?
Yes, across the KR stud type and NUKR ranges. Send the full designation including suffixes — stud length, seal type and whether the outer is crowned or cylindrical are all carried in them.
Can you supply INA linear motion products?
Linear bushings and guides are available to order. Tell us the shaft size and travel and we will confirm what is available and the lead time.
Are your INA bearings genuine Schaeffler product?
Yes, imported through official channels in sealed original packaging with markings and batch codes intact, invoiced with HSN codes.