VISIT USMasjid Bunder, Mumbai
EMAIL USsales@pragatienterprises.net
CALL US+91 98205 61600
AISI 440C and 316 grade bearings with H1 food-grade grease options — built for wash-down, wet and hygienic environments.
A stainless steel ball bearing uses corrosion-resistant alloy for the rings and balls instead of the chrome steel used in standard bearings. The usual grade is AISI 440C martensitic stainless, which can be hardened to give real load capacity while resisting water, steam, cleaning chemicals and mild acids.
Where corrosion resistance matters more than load — fully submerged, or in aggressive chemical exposure — AISI 316 austenitic stainless is used instead. It cannot be hardened to the same degree, so load ratings and speed limits are lower, but it resists attack that would pit a 440C bearing.
For food, dairy, beverage and pharmaceutical plants we supply these bearings with H1 food-grade grease, which is registered for incidental food contact, and with FDA-compliant seal materials. This is the standard specification for wash-down conveyor and processing lines.
The variants, series and grades we hold and source for Indian industry.
Hardenable martensitic stainless with good load capacity and corrosion resistance. The standard stainless bearing for wash-down and damp environments.
Food Lines · DairyAustenitic stainless for severe chemical and marine exposure. Cannot be hardened as far as 440C, so load ratings and speeds are reduced accordingly.
Chemical · MarineNSF H1 registered lubricant approved for incidental food contact, filled at manufacture. Required specification for most food and beverage plants.
Food · Beverage · PharmaStainless rings with rubber contact seals both sides to exclude wash-down water and cleaning chemicals. The most commonly supplied configuration.
Wash-Down LinesCeramic balls with stainless rings, or fully ceramic construction, for extreme chemical exposure and non-magnetic requirements.
Chemical Plant · MRI AreasStainless insert bearings for use with stainless housings in hygienic conveyor applications, with grub-screw or eccentric collar location.
Conveyors · PackagingActual product photographs from our stocked brands and inventory.
Smooth deep-groove geometry minimises rolling resistance for high efficiency.
Low-friction design supports very high rotational speeds in motors and spindles.
C3 clearance and precision grades deliver quiet, vibration-free running.
ABEC/P5 & P6 grades available for spindles and instrument applications.
2RS, ZZ, 2Z and open variants to suit contamination and speed needs.
Chrome-steel and stainless (SS440/316) options for wet environments.
Genuine steel and lubrication for extended L10 bearing life.
Handles combined radial and moderate axial loads across all sizes.
Same-day dispatch from our Mumbai warehouse means a failed bearing doesn't stall your production line for days.
Genuine bearings with correct load rating and lubrication last significantly longer than uncertified alternatives, reducing repeat replacement cost.
Every bearing is sourced through authorized manufacturer channels, protecting your machinery from premature failure caused by fake or sub-standard bearings.
Free technical guidance on bearing type, clearance and seal configuration means you order the correct part the first time, avoiding costly reordering delays.
Standing order and bulk supply arrangements ensure your production planning is never disrupted by stock-outs.
PAN India delivery combined with same-day Mumbai dispatch gives you both national sourcing convenience and local urgency support.
These sizes ship same-day from our Mumbai warehouse. Call or WhatsApp for immediate availability.
| Part No. | Bore | OD | Width | Type | Common Application |
|---|---|---|---|---|---|
| S6200-2RS | 10mm | 30mm | 9mm | 440C Sealed | Small food conveyors |
| S6202-2RS | 15mm | 35mm | 11mm | 440C Sealed | Dairy equipment |
| S6203-2RS | 17mm | 40mm | 12mm | 440C Sealed | Bottling lines |
| S6204-2RS | 20mm | 47mm | 14mm | 440C Sealed | Wash-down conveyors |
| S6205-2RS | 25mm | 52mm | 15mm | 440C Sealed | Food processing drives |
| S6206-2RS | 30mm | 62mm | 16mm | 440C Sealed | Packaging machinery |
| S6207-2RS | 35mm | 72mm | 17mm | 440C Sealed | Beverage plants |
| S6208-2RS | 40mm | 80mm | 18mm | 440C Sealed | Heavy hygienic lines |
| S6000-2RS | 10mm | 26mm | 8mm | 440C Sealed | Compact assemblies |
| S6004-2RS | 20mm | 42mm | 12mm | 440C Sealed | Pharma equipment |
| Specification | Details |
|---|---|
| Ring & Ball Material | AISI 440C martensitic stainless standard; AISI 316 for severe chemical exposure |
| Cage Material | AISI 304 stainless or PTFE-based polymer |
| Seal Material | Nitrile standard; FDA-compliant and PTFE options for food and pharma |
| Lubricant | NSF H1 food-grade grease available; standard mineral grease otherwise |
| Bore Range | 3 mm to 100 mm in common series |
| Load Capacity | Roughly 20 percent below an equivalent chrome steel bearing |
| Operating Temperature | -30 °C to +150 °C depending on seal and grease specification |
| Corrosion Resistance | Resists water, steam, dilute cleaning chemicals and mild acids |
| Typical Compliance | Suitable for food, dairy, beverage and pharmaceutical plant use |
6200 and 6300 series — the global standard for AC and DC motor shaft support.
Angular contact and DGBB for combined load handling at high rotational speeds.
P5/P4 angular contact bearings for precision spindle applications requiring tight tolerances.
High-speed DGBB for ring frames, spinning rotors, and draw frame rollers.
We supply genuine ball bearings from the world's leading manufacturers — with full traceability and warranty.
All bearings sourced through official manufacturer channels with full traceability. Original packaging, authentic markings, and manufacturer warranty on every product — a key reason plants across India rely on us as their ball bearing supplier.
Over 2,000 SKUs stocked at our Mumbai warehouse. Standard 6200/6300 series ball bearings dispatched within 24 hours, with urgent same-day delivery available across Maharashtra for plant breakdowns.
27+ years of bearing application knowledge. We help you select the right bearing type, series, seal configuration and precision grade — free technical consultation with every inquiry.
While our warehouse and same-day dispatch operate from Mumbai, we deliver ball bearings across Maharashtra, Gujarat, Karnataka, Tamil Nadu, Delhi NCR, Telangana and every other state, with full GST documentation on every order.
Volume discounts and standing order arrangements for OEMs and repeat buyers, with flexible invoicing to match your procurement cycle.
Hassle-free replacement on any manufacturing defect, with a straightforward returns process so a wrong SKU order never holds up your line.
Trusted by maintenance engineers, procurement teams, and OEM manufacturers across India for over 27 years.
We've been sourcing our deep groove ball bearings from Pragati Enterprises for over 4 years now. Same-day dispatch from their Mumbai warehouse has saved us during more than one production breakdown. Genuine SKF stock, every single time.
What stands out is their technical support. Our team wasn't sure which angular contact bearing grade to use for a new CNC spindle, and their engineer helped us finalize the right P5 grade within a day. Order arrived on schedule.
As a supplier to the textile industry, we need consistent bearing quality with zero downtime risk. Pragati's stainless steel bearing range and PAN India delivery have made them our go-to supplier for the last two years.
Sourced through ISO 9001 certified manufacturing channels.
Every consignment checked for markings, packing & authenticity.
100% original — original packaging and manufacturer traceability.
Full brand warranty against manufacturing defects.
Authorized supply of SKF, FAG, NTN, NSK, KOYO, TIMKEN & NACHI.
Looking for a reliable stainless steel ball bearing supplier in India? Get a same-day quote on AISI 440C and 316 grades with NSF H1 food-grade grease — with fast dispatch from our Mumbai warehouse and PAN India delivery.
Whether you need a single bearing for a breakdown or a standing order for your entire plant — our team responds within 2 business hours, every working day.
Real technical people — no auto-replies.
Itemised quote with part number, price and availability.
Tell us your application — we'll recommend the right bearing.
Full GST invoices with HSN codes — always.
